Видео

Well there you have it…

How long is that tool that you used?

Nice setup,I’ve just ordered the k1800 cube

I just got the same issue and all I did was remove the battery terminals and cleaned them up and this solved the problem. 😅

Thank you for this! My Acura MDX is doing the same thing and the dealership said it’s the front camera has a crack in it. So I need to show them this!

What about the waterpump?

My wife`s 2011 Honda Odyssey is doing the same thing. So far Honda hasn't found anything. Of course, it doesn't do it when we take it to the dealership.

Late but glad you’re daughter is safe. I have the same car and have been watching your videos. Going to put a JNB sticker on mine. 💙

Hey, did you remove your silica bag?

Can get the first hose to release . I push in and seems flathead foes catch clip

Dang Im at 93K and car got code with fuel pressure low. Figure try it since it needs it anyway.

Why would Honda not put a gasket there, I'm making my own and put one there.

Is that novelist haruki murakami? He lives in oiso kanegawa

Does the engine should be running?

I just got the same issue on my Acura RDX 2021. I have to take it to the dealership.

When he's under the car, after removing first two bolts he reaches up and says "I've got the top off" and pulls a rubber housing off of something. I have no idea what that was but I guess I'll find out when I try this.

I just bought a 2016 golf R off the family that own's this shop in Langley. It has a FR450 HPA turbo kit and lots of other upgrades and tuned buy them and it is fast.

Hi is this the same as 2006 mdx

Thank u for the help, you worked best to show us pretty much everything.

The shop is clean and very well organized

Good video man! Just a few ideas though, try to make sure your product you’re reviewing is in the middle of the screen. It could help to have tags on each section you’re talking about so people who maybe time poor are able to head straight to the clip’s which maybe meaning for them.

Great video. I had changed my pump which was whining quite loudly and it seemed it was obviously the problem because the steering wheel was super hard to turn. When I started to bleed the system with the new pump I noticed air was getting into the reservoir and I tracked down the leak in the hose to pretty much the area you indicated on yours so now thanks to you - I now know how to replace the line. Thank you!

OMG 😱 that was my 1st car!!! Mine was black. I loved that car so much and soooo fun to drive (especially in the snow 😂😂😂). I actually asked a classic car dealer in my area to find me one a couple of years ago, and it never happened. If you ever want to sell yours, hit me up 😊 Thanks for the videos though. It brings back a lot of fun memories! ✌️🖖🇨🇦

Menerjemahkan teks dengan kamera Hello Sir, I am a subscriber from Indonesia, I just replaced my car's power steering high pressure hose because it was leaking. But after replacing the hose, when my car steering wheel turned left or right, there was a buzzing sound in my power steering and the steering was heavier than before. In fact, before replacing the high pressure hose, there were no problems as I stated above. Where do you think the cause lies, because I tried taking it to a repair shop and they said someone analyzed it because my steering pump was problematic and someone analyzed it and said it was because the steering worm was heavy? I ask for help with this because you are definitely the expert. Thank you before . I'm waiting to hear from you.

Can you help me, I have connected rns 510 but the volume does not work, I can't hear anything?

When you run out, just use tyre shine spray! The local tech uses it and it's a fraction of the cost.

Thank you kindly for sharing and explaining the programming detail of the RNS-510. I'm still learning the ODBEleven, I'm more of the VCDS Vagcom system. Either way many thanks.

I really liked your video. Wish you had left link for the “fill pump” you used. Very well done, great information. Thanks😊

I being watching you for a while I like how you doing things, I have a question ❓ for you if you put oil or VTM4 fluid in and you driving it's not on but when you speed it comes on what can be the problem?

so to check all modules with the blue driver ,it takes about 17 minutes ,chris says 2 minutes,,,have used mine on 3 cars toyota corolla and honda civic honda accord .using android samsung 5g fe 20 ,so no problem phone is 2 years old data is pretty fast 5g connection,,,,,you will grow old waiting for module scan to finish.believe me just a drain on your car battery so turn car on 20 minutes gas time will be wasted .

Hi sir , what kinda fluid film did you used ?

Why not install your axel assembly at the top of the crate (what you’re using as the storage position) then use the bottom surface of the crate as the carrying surface for the boat? With that configuration the crate is upright (and wheels up) when in the boat and upside down when carrying the kayak.

Do you recommend driving car a few miles to heat up the fluid prior to draining? Thank you for video. Very well demonstrated.

Is it 60% water VS. 40% coolant/antifreeze OR 60% coolant/antifreeze VS. 40% water?

Kitt wipes them all in a race 💯

I own a 05 Honda Pilot and want to service the transmission myself, but I notice only one RUclipsr posted a video on how to change the transmission filter too and where it is located. All the other how-to videos including this one only show the drain and fill process but leave out the importance of changing the transmission filter.

Hi i’ve got some honda bond, would that be okay to put on the back of the plate??

Looking at 2017 with about 100K Mi for $20K

Nicw ride.. Bro does the car give u feeling of getting pinned back into ur seat on hard acceleration?

I have the same AWE switchpath exhaust but with the diamond black tips. Sounds how the car should have came from the factory. Great video!

I have a 2020 S3 with Unitronic Satge 1+ ECU and Stage 1 TCU tune. It shifted amazing for a few months then began having a jerking in 1st and 2nd gear. I also had a very hard downshift from 7th to 5th when flooring it in normal Drive. It would cause a big clunk. When shifting in manual it was fine. I purchased OBDEleven and reset my TCU to factory and it made a huge difference. My car is shifting normally again.

Whats the tire size on it?

So hows the TCU tune now? I previously had a JB4 and removed it a few months ago and missing the extra power... But I am yet to hear of a perfect TCU tune for our cars. They all have their quirks with harsh shifting at lower RPMs when just driving around normal. Making the car annoying to drive in stop start traffic.

11:50 if it doesnt free up disconect brake line and abs and use a torch. I had to

Eqt is an average tune

❤

Can you use this tool to check the real mileage of the car?

Hey JB how you doin ? Im from calgary too and love watching all your video ,i have a VW tsi same like your previous VW,i do have a lot of question how to transform mine same what you did on your TSI ,i really need your advice and help specially changing the breaks ,love what on those Tsi before,looking forward on meeting you one of this day as fellow calgarian here ..thanks JB

Good day JB ,i been watching all your video specially with your previous VW golf Tsi ,love how you transformed that car ,so i got my self a VW tsi ,i want to do the same specially with the breaks ,im from calgary too living in SW area maybe you can help me ,thanks